I-GJ2A10-33

Inkcazo emfutshane:

Yokwahlulahlula ulusu oluhlaza okwesibhakabhaka kunye nolusu olunyibilikileyo, kunye nesikhumba sokwenziwa, irabha yeplastiki.

Thumela i-imeyile kuthi

Iinkcukacha zemveliso

Umatshini oqaqambileyo obambisane ne-mercier

I-1. Ubuninzi be-mini ngolusu lwe-chrome yi-0.6mm, i-± 0.1MMM, isikhumba esiyintsundu siyi-1mm, ukuchaneka ± 0.2mm.
2. Inkqubo yokuLawula i-PLC, onke amaqela ombane anobungqina bamanzi, inkumbulo yonke kwakuqala umbane.
3. Ungayisebenzisa iprojemu yohlengahlengiso kwimenyu, ehlengahlengiswe ngokuzenzekelayo.
I-4. Inendawo ephakamileyo yokuchaneka kwe-roller eyondla kunye ne-coller roller.
I-5. Indawo yokuhlala phakathi kwe-nylon roller kunye ne-roller eyondlayo inokuhlengahlengiswa ngesandla.
6. Ngenkqubo, ukunyuka, ukuwa kwaye ugobe iroller eyondlayo kunye nobhedu lobhedu, iiparamitha zingahlengahlengiswa.
7. Isikhundla esibukhali sikwimeko enesifo sokutya, i-coller roller roller ngolawulo lwedijithali.
I-8. Isikhundla soxinzelelo lweplanga ngaphambili ngolawulo lwedijithali.
9. Iplate yoxinzelelo inokuvula ngokuzenzekelayo kwaye ivale, ilungele ukuthatha indawo kwaye icoceke.
I-10. Isikhundla se-BANKINKINYITHE NGOKUQINISEKILEYO NGOKUGQIBELA I-0.02mm, kwaye iphinde iphinde iphinde ibuye ngokukhawuleza.
11. Isixhobo esisigxina sokuzibhuka ngokuzenzekelayo xa i-band impukusi kwisikhundla, qinisekisa ukhuseleko.
12. Kulungele ukutshintsha isitshixo sebhendi, akukho sidingo sokususa ishaft spline kunye ne-cartan rhanent nt.
13. Ilungiselelwe ngesixhobo esigqithisileyo sesikhumba esisezantsi, sinokuphuma ulusu ukusuka ngasekhohlo okanye kwicala lasekunene, kulula ukutshintsha.
I-14. Kulungele ukongeza ngokuzenzekelayo isixhobo solusu xa hlula ulusu olusenyongweni.
15. Isixhobo esihleliweyo se-zebric.

Ipharamitha yobugcisa

Imodeli

Ububanzi bokusebenza

(mm)

Isantya sondla

(m / min)

Igunya lilonke

(kW)

Ubukhulu (mm)

L × w × h

Ubunzima

(ikg)

I-GJ2A10-300

I-3000

I-0-42

26.08

I-6450 × 2020 × 1950

I-8500

Iinkcukacha zemveliso

C Uhlobo oluqhelekileyo lohlobo

Yokwahlula ulusu oluhlaza okwesibhakabhaka oluhlaza, umkhuhlane owomileyo okanye isikhumba se-synthetic

I-1. Ubuninzi be-minis yesikhumba esiluhlaza okwesibhakabhaka yi-0.5mm, ukuchaneka kwe-0.08mm, i-Leather ye-0.3mm, i-± 0.06mm.
2. Inkqubo yokuLawula i-PLC, onke amaqela ombane anobungqina bamanzi, inkumbulo yonke kwakuqala umbane.
I-3. Isikhundla soxinzelelo lwepleyiti olwenziweyo ngolawulo lwedijithali.
4. Isixhobo sengxabano sizimeleyo sizimele sikwinkqubo yokusebenza, ukuboniswa koxinzelelo ngemitha yoxinzelelo.
I-5. Isikhundla se-BANKINKINYINGUSUTION SINGCINATION yi-0.04mm.
I-6. I-PLC ilawula i-roller yondla okanye ezantsi kancinci.
7. Umgama phakathi kwe-coreper ring roller kunye nebala kulula ukuyihlengahlengisa.

Ipharamitha yobugcisa
Imodeli	Ububanzi bokusebenza(mm)	Isantya sondla(m / min)	Igunya lilonke(kW)	I-Minick Minick (MM)	Ubukhulu (mm) L × w × h	Ubunzima (ikg)
I-GJ2A9-120	1200	6.4- 32	9.96	I-0.3	3880×I-1150×I-1570	2140
I-GJ2A9-150	I-1500	6.4- 32	14.18	I-0.3	I-4180×I-1150×I-1570	2560
I-GJ2A9-180	I-1800	7-36	15.74	0.5	I-5075×I-1600×Ngo-1950	I-7200
I-GJ2A9-300	I-3000	7-36	19.54	0.5	I-6275×I-1600×Ngo-1950	I-8000
I-GJ2A9-320	3200	7-36	20.54	0.5	I-6475×I-1600×Ngo-1950	I-8500